Updated November 2026

An off grid water system NZ property relies on a water source, a way to move that water, storage to buffer demand, and treatment to make it safe to drink. This guide walks you through each stage so you can size the system around your actual flow rates, head height and daily use, rather than guessing. By the end, you will have a clear picture of what you need and in what order to build it.

Step 1: Work Out Your Daily Water Demand

Start with usage, not equipment. Add up how many litres or gallons each person uses per day, then include livestock, garden irrigation, and any appliances such as a washing machine or dishwasher. Most New Zealand households use somewhere in the range of 150 to 250 litres per person per day, but remote properties often run leaner, so check your own habits over a typical week.

Shopping for one? See our guide: 6 Best Off Grid Water Purification System Options for Remote Living (2026).

Once you have a daily figure, note your peak hourly demand. A shower running alongside a tap and a washing machine can pull more flow than your average daily total suggests. This peak figure determines the pump flow rate you need.

Step 2: Assess Your Water Source and Head Height

Your source might be a bore, spring, stream, or rainwater collected from roofs. Each one behaves differently. A bore needs a pump rated for its depth and yield, while a gravity-fed spring may need no pump at all if the source sits well above the house.

Measure the vertical distance from the water surface to the highest outlet, which is your total head. Pumps lose flow as head increases, so check the manufacturer’s flow-versus-head curve. Note the length and diameter of your pipe run as well, because friction losses add to the head you must overcome. If your source is a bore, consult a licensed driller or water professional before you commit to a pump depth.

Step 3: Size the Pump, Storage and Pipework

Match the pump to your peak flow at your total head, with a margin for pipe losses. Storage is typically sized to carry you through a dry spell or a pump outage, commonly a few days of average use. Tanks are usually placed above the house to provide gravity pressure, or paired with a pressure pump and pressure tank.

Use pipe diameter that keeps water velocity reasonable. Undersized pipe causes noticeable pressure drop over longer runs, which can make a correctly sized pump feel underpowered at the tap.

Quick sizing checklist

  1. Daily litres per person multiplied by number of people, plus livestock and garden use.
  2. Peak flow in litres per minute for simultaneous outlets.
  3. Total head in metres, including pipe friction losses.
  4. Storage volume covering several days of average demand.
  5. Filtration and UV or chlorination rated for your peak flow.

Step 4: Plan Treatment and Monitoring

Untreated surface water and some groundwater can carry bacteria, protozoa and sediment. Plan a sediment filter first, followed by a disinfection stage such as UV or chlorine, with a carbon stage if taste or chemicals are a concern. Make sure each stage is rated for your peak flow, because a filter rated below your pump output will restrict supply.

Testing is essential. Arrange periodic lab testing of your water, particularly after heavy rain or if the source changes. Your regional council or local health authority can advise on testing requirements for private supplies.

Common Mistakes to Avoid

  • Sizing the pump on the manufacturer’s best-case flow rather than the flow at your real head.
  • Ignoring pipe friction, which can quietly cut delivered flow over long runs.
  • Skipping a sediment pre-filter, which shortens the life of pumps and UV lamps.
  • Building storage too small for a dry spell or pump failure.
  • Leaving freezing pipework exposed in colder inland areas.

A submersible or surface pump sized to your flow and head is the core of most setups, so search for a model rated for your bore or tank depth. View on Amazon

A multi-stage sediment and carbon filter housing protects downstream components and improves taste. View on Amazon

A UV sterilizer sized for your peak flow handles microbial treatment without chemicals. View on Amazon

For a broader planning view, see Water System Off Grid: A Step-by-Step Guide to Planning Yours and Off Grid Water Filtration System: A Step-by-Step Guide for Remote Homes. If you are working through the sizing maths, Off Grid Water Treatment System: A Step-by-Step Guide to Sizing Yours (2026) covers the treatment side in more depth, and Off-Grid Water System Design: A Step-by-Step Guide for Beginners shows how the pieces connect.

FAQ

How much water does an off grid household need per day?

Many households use roughly 150 to 250 litres per person per day, but this varies with habits and garden or livestock use. Track your own usage for a week to get a reliable baseline.

Do I need a pump if my water source is higher than the house?

Not necessarily. Gravity can deliver water if the source sits well above the outlets, though you still need to check pressure and pipe losses. A pump is needed when the source is lower or the flow requirement exceeds what gravity can supply.

Is untreated rainwater or bore water safe to drink?

Not without treatment. Both can contain bacteria, sediment or other contaminants, so use appropriate filtration and disinfection and test regularly. A water professional or your local health authority can advise on requirements.

Conclusion

A reliable off grid water system NZ setup starts with measuring your demand, head height and source before choosing any equipment. Size the pump, storage and treatment together so each stage matches your peak flow. Test your water regularly, and consult a licensed professional for bore or health-related decisions.

Emily Parker

About Emily Parker

Emily Parker is part of our editorial team and reviews and edits our solar water systems guides, checking product details against manufacturer specifications and owner feedback.